Jones Solution Wide Men's Splitboard

The ultimate all-terrain splitboard

The Solution is the ultimate all-terrain splitboard and delivers unrivaled backcountry performance in any snow condition. Featuring a directional freeride shape, directional rocker profile and a mid-sti flex, the Solution is playful in soft snow, yet confidence inspiring on steep, hard snow. For better float in pow, the Solution’s tapered shape sinks the tail and the 3D Contour Base makes every turn more fluid and eortless. For added response, the Solution is built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. For added edge grip and torsional board lock, the Solution features Inner/Outer Traction Tech 3.0, plus Karakoram Tip-Lock clips that lock closed, and Karakoram Ultra Clips 2.0 that are smaller and lighter than the original Ultra clip design.

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder the nose gets caught under a weird crust and tosses you or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Shape Tech

1. Inside & outside Traction Tech 2.0

Like a serrated knife slicing into the snow Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Inner edge Traction Tech

Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2. Progressive sidecut

At the far ends of the sidecut the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3. Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

4. Boltless Bridge

The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Tapered shape 12.5 mm

The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt nose

How a board glides in powder crust corn or any snow more than an inch deep is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

3D Contour Base 3.0

Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

About 3D Contour Bases

3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

Built with the finest tech and materials

100% of our adult models feature high-end materials construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Base

Sintered 9900 Base

Made from Ultra-High Molecular Weight ­Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Flip-Flop Base

Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Extra hardware

Karakoram Ultra Clips

Ultra clips are the strongest lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Karakoram Tip-Lock tip clips

Every splitboarder knows the feeling - you drop into a firm line and your tip clip pops open! Never again. Using Active Joining Technology the Karakoram Tip-Lock tip clips quickly lock and clamp the tips of your splitboard with the flick of the lever.

Fiber

Triax Fiberglass

Multi-axis stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Other Features

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organicc raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex New

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Inner thin recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm inside edges are 1.5mm.

Outer oversized recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm inside edges are 1.5mm.

Power Basalt stringers

Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges improve torsional response and absorb board chatter.

Stainless steel reinforcement

Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Reinforcements

Sustainable Flax/Basalt Stringers

Jones exclusive sustainable stringer made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges improves torsional response and absorbs board chatter.

Topsheet

Textured Eco-plastic topsheet

Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Woodcore

Ultra Split Core

Dual density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Sizing Details

Choose your ideal board size range using your body weight and boot size.To decide between two sizes choose the smaller size if your priority is maneuverability and freestyle performance choose the larger size if you're focused on riding fast and powder performance. A shorter board will be easier to turn and a longer board will offer better float and stability riding off-piste.

*If you wear US Men’s 11.5 or bigger look for our Big Horn Series boards with minimum waist width 26.3 cm.

Men's Solution Wide Splitboard Specifications

High performance sustainably made gear.
We design gear that balances performance durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2023 all our snowboards and splitboards are molded with Super Sap Bio-Resin.

Proud member of 1% For The Planet we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.

Eco-Performance
We never sacrifice performance and durability for sustainability.
We strive to make products with the least impact on the planet possible but we trust our lives to our gear so we must value performance foremost. We test new materials and production processes to make sure we never sacrifice performance or durability just to make a product more sustainable. Durability is a critical aspect of sustainability as the longer the gear lasts the less waste that goes to the dump. This ECO-Performance design philosophy is the foundation upon which everything we make is made.

Sustainability
We strive to minimize the impact of our gear.
To make gear in the most responsible way possible we strive to minimize the impact of our materials and manufacturing processes however we can. All of our snowboards splitboards and outerwear are partially if not completely made with recycled materials and they always have been. Our boards are also made in a factory that runs on 100% solar power and the fabrics we use in our outerwear are Oeko-Tex and/or Bluesign® certified - the two leading responsible material certifications in the apparel industry.

Innovation
We aspire to do things differently.
From our groundbreaking board shapes to our trailblazing outerwear designs we never settle for anything less than game changing gear performance. By keeping an open mind to new gear concepts materials and production processes we aspire to do things differently and make innovative gear and outerwear that blends comfort durability and industry leading responsible manufacturing practices with standard setting performance.

Free shipping cost for orders above 40€ (For Greece)

Returns within 15 working days from the date of delivery.