Jones Stratos Men's Snowboard
Jones Stratos Men's Snowboard
SKU: 403031017
The modern all-mountain ripper
Ideal for all-conditions freeriding, freestyle and carving.
The new Stratos is a hybrid all-mountain board built with the body of a directional freeride board and the spirit of a freestyle board.
The Stratos has a playful board feel thanks to a narrow sidecut and friendly flex, but the 10mm of taper and 3D Contour Base 3.0 give it the float and turn performance of a pow board. The directional rocker profile and Traction Tech 3.0 keep the Stratos locked on edge accelerating into carves and the textured Eco-plastic topsheet and Basalt stringers add torsional response and reduce board chatter in rough terrain. The Stratos also features our new Float Pack inserts. The Float Pack offers a setback stance option for the deepest days. For improved sustainability, the Stratos is built with Bio Resin instead of standard petroleum-based epoxy and an Ultra wood core.
Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones
Shape Tech
1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.
2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Tapered shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.
Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
3D Contour Base 3.0
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.
Built with the finest tech and materials
100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
Base
Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.
Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Insert Pack
Float Pack New
Allows super setback stance for deep pow days.
Other Features
Forever Flex New
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
Power Basalt stringers
Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges, improve torsional response and absorb board chatter.
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organicc raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
Oversized Recycled Edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Reinforcements
Power sustainable basalt stringers
The ultimate balance of weight and power. Ultra series models are built with speed boosting, chatter sucking premium materials compared to standard models.
Topsheet
Textured Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
Woodcore
Ultra Core
Dual-density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.
| Board Size (cm) | 153 | 156 | 159 | 161 wide | 162 | 164 wide |
|---|---|---|---|---|---|---|
| Weight Range (lbs/kg) | 120-170 lbs. / 54-77 kg. | 120-170 lbs. / 54-77 kg. | 140-190 lbs. / 64-86 kg. | 150-200 lbs. / 67-91 kg. | 150-200 lbs. / 67-91 kg. | 160-210 lbs.+ / 73-95 kg. + |
| Ideal Boot Size (US/EUR) | 7-9 US / 39.5-41.5 | 9-11 US / 41.5-44.5 | 9-11 US / 41.5-44.5 | 11+ US / 44.5+ | 9-11 US / 41.5-44.5 | 11+ US / 44.5+ |
| Big Horn Series * | Yes | Yes | ||||
| Board Waist Width (cm) | 24,8 | 25,4 | 25,6 | 26,4 | 25,8 | 26,5 |
| Bindings Recommended Size | S/M | S/M | M/L | M/L | M/L | M/L |
| Skins Group | - | - | - | - | - | - |
Free shipping cost for orders above 40€ (For Greece)
Returns within 15 working days from the date of delivery.
The modern all-mountain ripper
Ideal for all-conditions freeriding, freestyle and carving.
The new Stratos is a hybrid all-mountain board built with the body of a directional freeride board and the spirit of a freestyle board.
The Stratos has a playful board feel thanks to a narrow sidecut and friendly flex, but the 10mm of taper and 3D Contour Base 3.0 give it the float and turn performance of a pow board. The directional rocker profile and Traction Tech 3.0 keep the Stratos locked on edge accelerating into carves and the textured Eco-plastic topsheet and Basalt stringers add torsional response and reduce board chatter in rough terrain. The Stratos also features our new Float Pack inserts. The Float Pack offers a setback stance option for the deepest days. For improved sustainability, the Stratos is built with Bio Resin instead of standard petroleum-based epoxy and an Ultra wood core.
Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones
Shape Tech
1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.
2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Tapered shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.
Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
3D Contour Base 3.0
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.
Built with the finest tech and materials
100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
Base
Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.
Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Insert Pack
Float Pack New
Allows super setback stance for deep pow days.
Other Features
Forever Flex New
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
Power Basalt stringers
Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges, improve torsional response and absorb board chatter.
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organicc raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
Oversized Recycled Edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Reinforcements
Power sustainable basalt stringers
The ultimate balance of weight and power. Ultra series models are built with speed boosting, chatter sucking premium materials compared to standard models.
Topsheet
Textured Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
Woodcore
Ultra Core
Dual-density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.
| Board Size (cm) | 153 | 156 | 159 | 161 wide | 162 | 164 wide |
|---|---|---|---|---|---|---|
| Weight Range (lbs/kg) | 120-170 lbs. / 54-77 kg. | 120-170 lbs. / 54-77 kg. | 140-190 lbs. / 64-86 kg. | 150-200 lbs. / 67-91 kg. | 150-200 lbs. / 67-91 kg. | 160-210 lbs.+ / 73-95 kg. + |
| Ideal Boot Size (US/EUR) | 7-9 US / 39.5-41.5 | 9-11 US / 41.5-44.5 | 9-11 US / 41.5-44.5 | 11+ US / 44.5+ | 9-11 US / 41.5-44.5 | 11+ US / 44.5+ |
| Big Horn Series * | Yes | Yes | ||||
| Board Waist Width (cm) | 24,8 | 25,4 | 25,6 | 26,4 | 25,8 | 26,5 |
| Bindings Recommended Size | S/M | S/M | M/L | M/L | M/L | M/L |
| Skins Group | - | - | - | - | - | - |
Free shipping cost for orders above 40€ (For Greece)
Returns within 15 working days from the date of delivery.
